Sa lá atá inniu ann, tá sciar den mhargadh de mheaisíní múnlaithe buille ag éirí níos airde agus níos airde. Nuair a úsáidtear meaisíní múnlaithe buille níos mó agus níos mó, tá níos mó teipeanna le feiceáil. Sa lá atá inniu ann, tabharfaidh Zhangjiagang Eceng Machinery Co., Ltd tú chun meaisíní múnlaithe buille a thuiscint Réiteach le haghaidh pléasctha buidéal nuair a bhíonn buidéal á mbuidéil:
The preform is heated too high and the preform turns white
Réiteach: Tá paraiméadair socraithe gach monaróir meaisín séideadh buidéal difriúil. Ní mór duit dul i gcomhairle leis an gceannaitheoir chun teocht teasa gach lampa a shocrú agus é a choigeartú go teocht oiriúnach. Go ginearálta, déantar whitening an preform go príomha mar gheall ar théamh iomarcach. Le do thoil ísligh gach lampa mar is cuí. Teocht an fheadáin.
The blow molding machine is not set to pre-blowing or the pre-blowing time is too short
Solution: Adjust the pre-blowing parameters during the setting process of the bottle blowing machine, and adjust the pre-blowing time of the bottle blowing machine according to the manufacturer's technical parameters.
The high pressure of the blow molding machine
Solution: If the high pressure is set too high, it is most likely to cause the bottle to explode during the blowing process. After the stretch rod stretches the preform, the high pressure blows the bottle quickly. Excessive pressure directly causes the preform to explode.
The mold is not in place during the mold clamping process
Solution: The majority of bottle bursts in the mold clamping process are caused by the incorrect clamping position of the bottle. This problem is mostly caused by the manufacturer's failure to adjust the mold in place, and the clamping mold needs to be reinstalled correctly.
blow molding machine cylinder failure
If all the bottles in each cavity are burst bottles, and one cavity bursts out one cavity, it is mostly because the cylinder of the blowing machine is broken, and a new cylinder needs to be updated.
